Should you wish to follow the G11 'do it yourself' project from the very beginning, then please start reading the oldest posts first. They are located in the Blog Archive.

Sunday, February 21, 2016

G3020 and G40 settings: VAC, com0com, WSJT-x and GSDR

1. Virtual audio cables: I am using VAC from Eugene V. Muzychenko. However there is a free software which does the same job called VB Cables. 2. For virtual port I suggest free application called com0com . 3. WSJT-x is freeware. 4. G3020 is connected to PC via serial port COM1. This port is located directly on motherboard. Alternatively use serial to usb adapter.

No comments:

Post a Comment